Inorganic composite membrane equipment

Product Introduction

It has the characteristics of strong anti pollution ability, easy cleaning, and high pressure resistance. It can replace microfiltration, ultrafiltration, and nanofiltration membrane elements. By switching through pipelines, different precision filtration experiments or production can be completed without disassembling the membrane elements, achieving unified experiments and cleaning, and facilitating operational needs; Widely used in multiple interdisciplinary fields such as fermentation, plant extraction, food and beverage, biopharmaceuticals, chemical engineering, and environmental protection for separation and purification.

Basic technical parameters

1. Filter area: 15 ㎡/set

2. Working temperature: 4-55 ℃

3. Work pressure: 0-1.2MPa

4. Tolerant pH range: 2-11

5. Total installed power: 1.1Kw

6. Membrane element area: 2.5 ㎡/piece

7. Material of overcurrent components: SUS304

8. Electricity demand: 220V/50HZ

9. Equipment size: 1640 (length) x 1200 (width) x 1420 (height) mm

Product features and process introduction

1. Integrated structural design, equipped with rollers, and quick installation pagoda joints for import and export

2. Equipped with automatic overpressure protection function, automatic shutdown due to overpressure; Equipped with over temperature automatic protection function, automatically shuts down when over temperature occurs

3. 6 microfiltration, ultrafiltration, and nanofiltration membrane elements can be selected, and the membrane elements comply with FDA, 3-A, and USDA hygiene standards, with strong anti pollution ability and stable flux

4. Using domestically produced high-quality multi-stage vertical centrifugal pumps, the feed/circulation pump provides pressure and flow for the membrane components. The pump works stably, has reliable performance, and strong corrosion resistance

5. The system is equipped with an automatic protection device and an emergency stop button. When pressed, the equipment will immediately stop and enter standby mode when reset

6. If the membrane pressure is higher than the set value (the parameter can be adjusted, such as setting 0.8MPa), the system will be protected and automatically shut down with an alarm

7. When the material temperature is higher than the upper limit set value or lower than the lower limit set value (the upper and lower limit parameters can be adjusted), the system will be protected and automatically shut down with an alarm.